The steps of making bronze statues and the methods of maintenance

Among sculptures, the material of figures is a relatively common one, especially in campuses or museums. Most of the statues of figures are made of plaster or cast copper. Take the cast copper material for example, cast copper has the characteristics of corrosion resistance , The service life is longer. The following Beijing Bronze Casting Sculpture Company will introduce to you the steps of making bronze statues and the methods of maintenance. First, the steps of making bronze statues: the steps of making bronze statues: make clay drafts, the company will According to the drawings set by the customer, the mold production required for the production of the character bronze statue is carried out, and the production of the mold generally uses the sculpture clay for the 1:1 mud molding production. The customer confirms that the shape of the clay sculpture meets the requirements of the character bronze statue production drawing. One-step process. The second step of the production of the figure bronze statue: After the clay sculpture model is completed, the mold must be reproduced. The third step in the production of bronze figures: brush wax on the plaster, the paraffin wax on the plaster is to control the thickness of the cast copper, (such as the thickness of the paraffin wax is 25px, the thickness of the cast copper is 25px) to make the bronze figure. The fourth step: the casting of the character bronze statue, generally using the more advanced lost wax casting method to make the character bronze statue. The fifth step of the character bronze statue production: the casting of the character bronze statue is completed, the embryos are removed for welding and polishing, and after completion The surface is treated, colored, and chemically corroded. In this way, the production of the bronze figure is complete. Second, the maintenance of the figure bronze 1. The figure bronze statue is sprayed with fluorocarbon paint when it leaves the factory, and the figure copper is added The wear resistance and corrosion resistance of the surface can also bring richer surface treatment effects to the bronze statue of the figure. Such spray paint can be stored for about 20 years, that is, it can be renovated once in 20 years. 2. Regularly clean the bronze statue of the figure The surface should be wiped with a dry, soft rag, and some folds and bumps can be cleaned with a soft brush. 3. Avoid contact with chemical corrosive substances such as strong acids and alkalis, and keep the bronze statues in a dry and good environment, and avoid moisture and air pollution. Serious environment. 4. If the surface of the bronze statue is slightly worn or matt, it can be polished with the polishing tool of the bronze statue. If there is no polishing tool, it can be wiped back and forth with a soft cloth, and a little polishing material can be added. Good. The above is an introduction to the steps of making bronze statues and the methods of maintenance. I hope I can help you.