Woodcarving of filling material _ figurine skills

Summary: after the completion of the engraving, because of the flaws of wood, such as cracks, holes, local corrupt or because of damage, such as mark, nails, need filling materials for repair. Generally do sculpture is completed, because of the flaws of wood, such as cracks, holes, local corrupt or because of damage, such as mark, nail eyes, need filling materials for repair. The general method is: use up such as stone, brick powder, loess ash filling materials with animal blood, animal glue, tung oil, varnish of adhesive material such as mixed to create 'putty'. 'Putty' class includes: water old pink water-based hole filling material. By calcium carbonate, Old pink) And the ratio of water to reconcile. Used in thick wood hole as 1:1 fine wood hole of 0. 4-0. 6, and then according to the wood with a proper color pigment. Old powder by oil 7%, oil rosin water 9. 5%, calcium carbonate 73% plus a certain pigments are adjusted. Animal glue grey with animal glue melted with hot water, add right amount into powder, ash powder, also can according to need to paint. Fresh pig blood blood ash will be half an hour in the sun insolates, 10% fine ash mixing. Half an hour later, the color is gray green, and add the calcium carbonate ash powder seventy percent, mix well and can be used. Blood ash water insoluble. Lacquer ash with ash powder added into raw lacquer or varnish. Paint blood mixed ash proportion according to the ratio of fiddling with the fresh pig blood, raw lacquer, plus grey powder into half an hour. Pig blood sealing fluid will pig blood mixture. Add water 80%, 20% in 80 to sieve filtered into, namely for brush priming before the wood surface, can be closed. Used as backing, can make the paint evenly, enhance the affinity of paint and paint dry quickly.