Resin handicraft factory pay attention to the key link in the production

by:Ennas      2021-08-21
In manufacturing industry, for the product of the whole production process is very important, as long as there is a certain link in production when not strictly according to procedures, can make products appear defects, resin handicraft industry even more so, every link in the whole manufacturing process is the key. , mold choice: this is the key to make mold: mold of the material of plastic, ceramic, wooden, metal, resin, sludge, such as can be, but the surface must be smooth. Can only make smooth surface model of grain clear smooth surface of the mould, use this mould to make qualified products. 2, mold processing methods if die surface roughness or have defects, must will die first kind of good repair to do mould: if die kind of flawed mould sludge can be used or mixed resin will lack of repair parts, after waiting for air, with around 1000 mesh fine sand paper burnish, clean, and then spray varnish, to dry and then take the mold. If the surface of the complete but coarse, can use a sandpaper and trimming gun spray varnish after carefully grind, dry and then take the mold. Three, the deployment of material according to the requirement of the products do the resin and powdered materials in proportion to allocate well, this also is a key link in the process of resin handicraft production technology, a lot of people don't seriously, so do not make good product. First mix resin and powdered material in the container together is good, but don't add promoting agent and curing agent. According to the production quantity and schedule is best tuned slurry let stand for about 20 minutes in a container, such resin and powdered material to mix, and eliminate the bubbles and then add the promoter and irrigation mode after curing agent, such a product is clean and smooth. Four, curing agent and promoter of the same resin and ingredients to make the product has good there, mainly depends on the quality of the curing agent and promoter. There are a lot of curing agent and promoter big moisture content, make product surface coarse, instead of water or less water promoting agent and curing agent to make the product is smooth and neat. Because the resin is oily chemical material can't add water, so be sure to choose water-free promoting agent and curing agent. Several links above resin handicraft production is very important, the products of post-production number, which is closely linked with the bad and the link is for people who are interested in resin handicraft production, also can enter our company's official website, learn more about such relevant information.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...