Precautions for maintenance and cleaning of stainless steel sculptures

We can see all kinds of sculptures everywhere in our lives. Among them, stainless steel sculptures are a relatively common one. For stainless steel sculptures, people may still have a little understanding of it. Let me introduce you to the maintenance and cleaning of stainless steel sculptures. , Maintenance of stainless steel sculpture 1. Regular cleaning: Regularly clean the stainless steel sculpture. When cleaning, first apply a neutral detergent to the surface of the sculpture, and then wipe the surface of the sculpture with a lint-free towel to remove larger stains. , You can spray it with a manual spray gun, and then wipe it with a dry towel. Remember to be gentle; 2. Dry environment Some sculptures need to be placed in an unventilated environment, while stainless steel sculptures are placed in a dry environment. Protect it; 3. Sweat prevents some human sweat from sometimes causing the stainless steel sculpture to rust. Therefore, it is recommended to wear gloves when holding it by hand. One is to prevent the stainless steel sculpture from scratching the back of the hand, and the other is to prevent sweat from causing the sculpture to rust Corrosion; 4. Clean the crevices when cleaning the crevices of the stainless steel sculptures, moisten them with a cotton ball and then wipe them, wipe them from the beginning to the end along the cracks to prevent omissions, remember not to wipe them directly with a wet towel; 5. Clean heavy dirt If the dirt on the rusty steel sculpture is too heavy, first blow it with a cold-air hair dryer, and then clean it with a straw brush.** Use a soft brush to finish it. Never use metal polish or any other solvents; 6.Scratch repair For the scratches on the stainless steel sculptures, as long as they are not very serious, they can be polished and repaired. In addition, we should avoid the sculptures from being scratched in normal life, because the scratches are serious, it is not easy to deal with; 7. Wax protection After cleaning the stainless steel sculpture, apply a thin layer of microcrystalline wax (i.e. colorless wax) to it, basically once a year. 2. Precautions for cleaning stainless steel sculpture 1. Use it first when cleaning Apply a sexual cleaner on the surface of the sculpture, and then wipe the surface of the sculpture with a lint-free towel. For larger stains, you can spray it with a manual spray gun, and then wipe it with a dry towel. Remember to be gentle. 2 When cleaning the gaps of the stainless steel sculpture, moisten it with a cotton ball and then wipe it, and wipe it from the beginning to the end along the cracks to prevent omissions. Remember not to wipe it directly with a wet towel. 3. If the dirt on the stainless steel sculpture is too heavy , First blow it with a cold air hair dryer, then clean it with a straw brush, and then finish with a soft brush. Never use metal polish or any other solvents. The second is to repair the scratches on the surface of the stainless steel sculpture. The content is an introduction to the maintenance and cleaning precautions of stainless steel sculptures brought to you by the Beijing stainless steel sculpture manufacturer. I hope it can help you.