how to make a resin figurine

by:Ennas      2023-06-10

How to Make a Resin Figurine

Resin figurines are a great way to add a personal touch to your home decor. Not only are they easy to make, but they also make great gifts for friends and family. In this article, well show you how to make your own resin figure in just a few simple steps.

Getting Started

Before you get started, you'll need a few supplies. Heres what you'll need:


-Silicone mold

- Mixing cups

-Stir sticks


- Pigment (optional)

- Figurine mold

Step 1: Prepare the mold

Firstly, you'll need to prepare your silicone mold. This can be done by washing it with soap and water, then drying it thoroughly. Once its dry, apply a light coat of mold release spray. This will help prevent the resin from sticking to the mold.

Step 2: Mix the resin

Next, mix the resin according to the instructions on the package. Be sure to wear gloves during this step to avoid skin irritation. If desired, you can add pigment to the resin to give it a pop of color.

Step 3: Pour the resin

Once the resin is mixed, its time to pour it into the mold. Be sure to pour slowly and evenly to avoid creating air bubbles. If bubbles do form, you can use a toothpick or a heat gun to remove them.

Step 4: Add the figure

After pouring the resin, its time to place the figure into the mold. Make sure its centered and fully submerged in the resin. If necessary, use a toothpick to adjust the position of the figure.

Step 5: Let it cure

Once the figure is in place, let the resin cure according to the instructions on the package. This can take anywhere from a few hours to overnight.

Step 6: Remove from the mold

Once the resin has cured, its time to remove the figurine from the mold. Gently pull on the sides of the mold to release the resin. If the resin is difficult to remove, you can place the mold in the freezer for a few minutes to loosen it up.

Step 7: Clean up

After removing the figurine from the mold, clean up any excess resin with a razor blade or sandpaper. You can also apply a coat of resin sealant to give it a glossy finish.

Tips and Tricks

- Make sure to wear gloves and work in a well-ventilated area to avoid skin irritation and respiratory problems.

- Keep your mixing cups and stir sticks clean to avoid any contamination.

- If you are using a colored pigment, test it out on a small amount of resin first to make sure you like the color.

- Don't overmix the resin, as this can create unwanted air bubbles.

- Experiment with different molds and figures to create unique designs.


Making a resin figurine is a fun and easy way to add a personal touch to your home decor. With just a few simple steps, you can create a beautiful and unique piece that's sure to impress. So, grab your supplies and get started today!

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...