Analysis: granite floor scratches after polishing _ figurine skills
Core tip: of all the natural stone flooring, granite is by far the most hard and wear-resistant materials, at the same time it also has a antifouling and acid-proof alkaline, so it is widely used for kitchen countertops and of all the natural stone flooring, granite is by far the most hard and wear-resistant materials, at the same time it also has a antifouling and acid-proof alkaline, so it is widely used for kitchen countertops and flooring.
Although granite is very hard, but it can still be scratch quartz.
Through the sole into indoor sand, the main ingredient is quartz.
People walk crushed sand, into smaller particles, particles pressure onto the surface of the granite can cause minor scratches.
The effect of the scratches on the granite is far less than the impact on the marble.
The correct maintenance care can reduce the damage.
Typical methods are dusted daily nursing granite floor, according to the traffic was cleaning the floor one or two times a week, using soap stone during cleaning.
To seal the floor and keep the floor color.
Then using the method of wet dust collection, clean with clear water floor also called wet dust collection, can prevent water damage.
Once a week or every few weeks, it depends on the traffic of the floor.
Can eliminate minor scratches, repair, high traffic area dim out the luster of the floor.
Every available abrasives and with stainless steel wire electric low frequency buffer polishing.
If you have to do this step, then the luster of the granite can keep more durable.
If you ignore the floor care, improper cleaning, it will grow dim, scratches will become apparent, increasing the dimming effect.
If this is the marble floors, scratches will be bigger, may need to change the floor.
Use polishing machine and diamond abrasives can restore luster.
But the secondary grinding granite, the success rate is very low.
It available diamond regrinding technology makes the luster, but most of the time of granite color change, it is clearly not acceptable for the customer.
Regrinding, if is marble, each square meter about 30 minutes, granite, due to the relatively hard, need about 2 -
In factory, about polished marble 40 minutes to reach high gloss effect.
The granite need several hours to reach the same effect.
Once the appearance have no way of the granite, only in this way.
So, if you have a granite floor, but have become dim, can ask our people to grinding restore its luster, not trouble.
But although restored floor luster, color, also a part of your money is spent, so be careful maintenance, there will be no such problem.